December 21st, 2024 6:37AM EST
1(888)626-4365
Lynch Fluid Controls logo
DIGITAL DISPLAY PROPORTIONAL VALVE DRIVERS
LE PN X Unit
LE PN X STANDARD SPECIFICATIONS
Operating voltage:
9 to 36 VDC
Maximum output current:
3.00 Amps
Input Signal:
5V, 10V, 4 to 20mA, -10 to +10V
Maximum ramp time:
99.5 Sec
PWM / Dither Frequency:
40-450Hz
Linearity:
1%
Operating Temperature:
-40 to +80 Celsius
Protection Grade:
NEMA 4X
Dimensions:
160mm x 80mm x 56mm
APPLICATIONS
Offshore Dredge
Offshore Dredge – The LE PN X can be used to control the swing winch used to adjust the speed of the dredge arm movement.
Yellow Skidsteer
Skidsteer – To smoothly control the lift and lower of a skidsteer bucket, the LE PN X can precisely control the proportional valves on the hydraulic system.

LE PN X
Shop Now

A dual amplifier enclosed in a NEMA 4X enclosure with a clear lid.
The LE PN X supplies a solenoid with current proportional to the input signal from a potentiometer, joystick, PLC or other control system. The dual solenoid proportional valve driver is used with bi-directional valves either Coil A or Coil B activated in a weather tight NEMA 4X enclosure with mounting holes. The enclosure has a clear lid to view driver operation.
FEATURES AND BENEFITS
  • Microcontroller design.
  • Independent adjustments (Incl. ramp up and ramp down).
  • 4 digit extra bright seven segment LED display.
  • Large, easy-to-use adjustments and readout.
  • Display and adjust actual values (current & voltage).
  • Wide range of supply voltage.
  • User selectable input type through menu setup (ex: 0 to 5V, 0 to 10V, 4 to 20mA, -10 to +10V).
  • Wide ramp time range (0 to 99.5 sec).
  • Simple control with analog input, locally supplied reference voltage.
  • Energy efficient PWM circuit, no heat sink required.
  • Electronic limiting circuit/ short circuit proof.
  • Reverse polarity, command input protection.
  • Load can be connected and disconnected live.
  • Easy troubleshooting.
Set-up Video
CE and RoHS certificate
This product has been designed and tested to meet specific standards outlined in the European Electromagnetic Compatibility Directive (EMC) 2004/108/EC
Emission: EN 61000-6-4: 2007, EN 55011:2009
Immunity: EN 61000-6-2: 2005, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-4, EN 61000-4-8:2001
RoHS: EN 50581:2012
Lynch Headquarters Mississauga on map.
Canada
1799 Argentia Road
Mississauga, Ontario, L5N 3A2
Lynch Headquarters New York on map.
U.S.A.
3790 Commerce Court Suite 500,
North Tonawanda, New York, 14120