December 21st, 2024 12:06PM EST
1(888)626-4365
Lynch Fluid Controls logo
DIGITAL DISPLAY PROPORTIONAL VALVE DRIVERS
LE PB X Unit

LE PB X STANDARD SPECIFICATIONS

Operating voltage:
9 to 36 VDC
Maximum output current:
3.00 Amps
Input Signal:
5V, 10V, 4 to 20mA
Maximum ramp time:
99.5 Sec
PWM / Dither Frequency:
40-450Hz
Linearity:
1%
Operating Temperature:
-40 to +80 Celsius
Protection Grade:
IP65
Dimensions:
78.6mm x 88.9mm x 21mm

APPLICATIONS

Conveyer belt
Mine Pit Conveyer Belt – By integrating the LE PB X into the proportional hydraulics you can smoothly operate the start up of the conveyer system to minimize aggregate spillage.
Agriculture crop sprayer in field
Agriculture Crop Sprayer – The LE PB X offers precise control of the arms of a crop sprayer as it lifts and lowers.

DDPDX PRODUCTS

Shop Now
Single proportional valve amplifier encased in a potted enclosure.
The LE PB X supplies a solenoid with current proportional to the input signal from a potentiometer, joystick, PLC or other control system and is encased in an epoxy allowing it to be used in rugged applications.

FEATURES AND BENEFITS

  • Microcontroller design.
  • Independent adjustments (Incl. ramp up & ramp down).
  • 4 digit extra bright seven segment LED display.
  • Large, easy-to-use adjustments and readout.
  • Display and adjust actual values (Current & Voltage).
  • Wide range of supply voltage.
  • User selectable input type through menu setup.
  • Wide ramp time range (0 to 99.5 Sec).
  • Rugged design offers vibration resistance.
  • Direct mounting.
  • Housed in fire retardant two part epoxy resin (UL94-VO).
  • Simple control with analog input, locally supplied reference voltage.
  • Energy efficient PWM circuit/no heat sink required.
  • Electronic limiting circuit/short circuit proof.
  • Reverse polarity, command Input protection.
  • Load can be connected & disconnected live.

Set-up Video

CE and RoHS certificate
This product has been designed and tested to meet specific standards outlined in the European Electromagnetic Compatibility Directive (EMC) 2004/108/EC
Emission: EN 61000-6-4: 2007, EN 55011:2009
Immunity: EN 61000-6-2: 2005, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-4, EN 61000-4-8:2001
RoHS: EN 50581:2012
Lynch Headquarters Mississauga on map.
Canada
1799 Argentia Road
Mississauga, Ontario, L5N 3A2
Lynch Headquarters New York on map.
U.S.A.
3790 Commerce Court Suite 500,
North Tonawanda, New York, 14120