Gear Pumps and Motors
High Pressure Gear Pumps & Gear Motors
High Pressure Gear pumps are available in six different groups (0.25, 0.5, 1P, 1, 2 and 3). Different pump displacements within each group, ranging between 0.011 cu. in./rev and 5.310 cu. in./rev, can be obtained by changing the thickness of the gear tooth band. Within the same group, different flanges, shafts, inlet and pressure ports are available.
|
Additional Gear Pump & Motor Options
- pumps with integrated maximum pressure valve;
- hi-pressure pumps.
- bi-rotational pumps.
- hydraulic motors (both unidirectional and bi-directional).
- modular multiple pumps.
- Contact Lynch Fluid Controls Inc for more information on these gear pumps and gear motor options.
|
|
NEW Hydraulic Gear Pump Models
Hydraulic Gear Pump Model GP-F0
|
Hydraulic Gear Pump Model GP-F1
- Aluminum Construction.
- High Pressure Hydraulic Gear Pump.
- 14 Displacement Sizes from 0.05 to 0.48 cu.in/rev.
- Standard Mounting Flange.
- GP-F1 Technical Information (PDF)
|
Hydraulic Gear Pump Model GP-F10
- Aluminum Construction.
- High Pressure Hydraulic Gear Pump.
- 11 Displacement Sizes from 0.07 to 0.82 cu.in/rev.
- Standard SAE-AA 2 Bolt Mounting Flange.
- GP-F10 Technical Information (PDF)
|
Hydraulic Gear Pump Model GP-F20
- Aluminum Construction.
- High Pressure Hydraulic Gear Pump.
- 11 Displacement Sizes from 0.24 to 1.95 cu.in/rev.
- Standard SAE-A 2 Bolt Mounting Flange.
- GP-F20 Technical Information (PDF)
|
Hydraulic Gear Pump Model GP-F25
- Aluminum Center/ Cast Iron End Plate Construction
- High Pressure Hydraulic Gear Pump.
- 6 Displacement Sizes from 1.22 to 3.48 cu.in/rev.
- Standard SAE-B 2 Bolt Mounting Flange.
- GP-F25 Technical Information (PDF)
|
| |
| | |
|
