March 18th, 2024 11:44PM EDT
1(888)626-4365
Lynch Fluid Controls logo

LIST OF PARTNERS

Lynch is proud to partner with some of the best suppliers of hydraulic components from around the world. We offer a wide range of high quality, cost effective products from well-known and trusted brands. Our team of experts will inspect and assemble your system before shipping so it is ready to go as soon as it arrives.

DISTRIBUTED & INTEGRATED PRODUCT LINES

Argo Hytos

ARGO HYTOS


Argo-Hytos is a global supply company that specializes in fluid and motion control, and filtration. With more than 75 years of experience, they offer innovative solutions to a wide range of industries, including construction, agriculture, industrial and renewable energy. Argo-Hytos offers products such as valves, electronics and solenoid systems, explosion proof valves, system solutions and much more.
Products
  • Valves
  • Electronic and Solenoid Systems
  • Explosion Proof Valves
  • Hydraulic Power Units
  • Accessories and Spare Parts
  • Pressure Switches
  • Hydraulic Drives
  • Filtration
  • Tank Solutions
  • Sensors & Measurements
  • Fluid Management.
Applications
  • Custom Solutions
  • Agriculture
  • Construction
  • Industrial
  • Wind Power
Balluff Logo

BALLUFF

With over 50 years of sensor experience, Balluff is a world leader and one of the most efficient manufacturers of sensor technology. With the right sensor system, hydraulic systems can solve almost any application issues; from mega-fast control in flight simulators to the toughest applications underground or in tunnel construction. Because Balluff sensor systems are being optimized in their own accredited test laboratory in highly accelerated lifetime tests (HALT). This makes for extremely durable products with Balluff offering first-class quality for every sector of the hydraulics industry. Balluff products are subject to extreme loads during development, possible weak points are removed and a robust product design is ensured.
Applications
  • Pressure measurement for assemblies, cylinders, pressure accumulators with pressure sensors
  • Fluid level detection in assemblies with capacitive sensors and micropulse transducers
  • Valve positions monitor with high-pressure-resistant inductive sensors
  • End position detection and continuous position measurement in cylinders: With high-pressure-resistant inductive sensors as well as micropulse transducers
  • Network and connection technology for industrial communication
Bieri Logo

BIERI HYDRAULIK AG

Bieri has more than 60 years of experience in the development, manufacturing and sales of quality hydraulics extending from standard high pressure components to special solutions - covering all pressure ranges up to 1000 bar. Bieri provides a complete range of high pressure hydraulic components including:
  • Axial and radial piston pumps (single or multiple outlets)
  • Seated valves (manually or solenoid operated)
  • Pressure valves (pressure relief valves, unloading valves, pressure reducing valves, load holding and lowering valves)
  • Flow control valves (orifice plates, throttle valves)
  • Non-return valves (shut-off valves, pilot operated check valves)
  • Manual gate valves
  • Pressure switches
  • Oil level switches
Bieri's standard components and special solutions are used in mechanical engineering, oil, shipbuilding, medical technology, power stations and high-voltage circuit breakers, mining, defense, public transport, paper, food, construction, and in many other areas of industry.
Brad Harrison Logo

BRAD®

Brad® connectivity products provide one convenient source for specifying numerous passive interconnect and industrial communications requirements for industrial applications. Standardize with Brad system solutions to simplify design, installation and maintenance processes.
Products
Ultra-Lock Connection Systems - The Ultra-Lock connection system surpasses performance and reliability of traditional threaded connectors, delivering increased productivity and cost savings.
Features
  • Locking Style: Positive locking, push-to-lock connection system
  • Fast, secure, reliable connection system
  • NEMA Rating: IP67, IP69K
Micro-Change (M12) Connectors - Micro-Change® (M12) industry standard connectors are rugged, compact, sealed connectors used for sensor/actuator connectivity in industrial control applications.
Features
  • Locking Style: M12 threaded connection system for sensor/actuators
  • NEMA Rating: IP67, IP69K
  • Built to IEC industry standard
Mini-Change Connectors - Delivering optimum conductivity, Brad® Mini-Change® Connectors from Molex offer the broadest selection of miniature connectors in the industrial market.
Features
  • Patented, Quad Beam™ socket
  • Poles: 2 – 19
  • NEMA Rating: IP67
Nano-Change (M8) Products - Nano-Change® (M8) industry standard connectors are rugged, space-saving, sealed connectors for miniature sensors and actuators in industrial control applications.
Features
  • Connection Type: M8 threaded connection system for sensor/actuators
  • Industry Standards: Built to IEC industry standard
  • IP67
Detrol Logo

DELTROL FLUID PRODUCTS

Founded in 1963, Deltrol Fluid Products started by designing and manufacturing in-line accessory hydraulic and pneumatic flow, needle, and check valves. Their brand quickly grew to include cartridge valves, solenoid and manual operated, directional control, flow control, and pressure control screw-in and slip-in style cartridge valves. Three-dimensional modeling software enables Deltrol to create the most compact and efficient solutions for customers. Deltrol's vertically integrated manufacturing facility enables them to produce high quality, cost effective parts on site. Deltrol's ISO 9001-2008 certified quality system ensures that designs are produced to customers’ expectations. One hundred percent of the produced products are functionally tested with automated computer-driven test systems.
Products
Solenoid Valves - A cartridge valve designed with positive shut off to be used in load holding applications.
Check Valves - A cartridge valve designed to allow free flow in one direction, while preventing flow in the opposite direction. This valve is commonly used as a load-holding or blocking valve.
Motion Control Valves - A cartridge valve designed to allow free flow in one direction, while preventing flow in the opposite direction. Reverse flow can be achieved by reaching the required pilot pressure. This valve is commonly used as a load-holding or blocking valve.
Flow Control Valve - Available options include; non-self-contained cartridge, fixed cartridge, or cartridge valve designed to provide a variable flow restriction with positive shut-off, or flow restrictions in both directions.
Relief Cartridge Valves - Available as an adjustable direct-acting poppet, adjustable pilot-operated spool, adjustable bi-directional poppet, adjustable pilot-operated spool, or a directing poppet cartridge thermal relief valve designed to limit pressure in hydraulic circuits, combine a shock relief valve, (direct acting) and anti-cavitation function, allow flow to actuator circuits until a predetermined pressure is attained, then to discharge flow back to tank at a low pressure.
Pressure Control Valves - Available as an adjustable, direct-acting, or fixed spool cartridge valve designed to regulate pressure in secondary circuits or to direct oil to a circuit when a predetermined pressure differential has been reached.
Sequence Valves - Available as an adjustable, direct-acting spool, internally-piloted spool, or pilot operated spool cartridge valve designed to direct oil to a circuit when a predetermined pressure has been reached.
Shuttle Valves - A cartridge valve designed to direct flow from either of the two inlet ports to a common outlet port.
Directional Cartridge Valves - Available as a manual operated pull style, toggle-operated, mechanically-operated, or manually-operated cartridge valve designed with positive shut off, low leakage and blocking in both directions, to allow free flow in both directions, or as a pilot-operated, three-way, two-position, spool-type, directional valve. These valves are commonly used in load holding or blocking applications.
Cartridge Valves Hand Pump - A self-contained cartridge style hand pump designed to deliver flow when the operator is pushed. The inlet and outlet checks are integral to the cartridge.
Doering Logo

DOERING COMPANY

Since 1969, Doering Company has built a worldwide reputation for precision designed and quality constructed valve and pump products for extreme environments. Doering is often referred to as a NICHE product company having manufactured many products otherwise unavailable. Their offering includes wide variety of materials including Stainless Steel and Teflon®.
Products
Pumps - Doering offers reliable hydraulic cartridge style hand pumps for the toughest, most demanding industrial applications. Pumps have a screw-in cartridge design and are manufactured to meet the highest quality control requirements.
  • Pressure production from 1,500 psi/103 bar to 10,000 psi/689 bar
  • Removable latching handles
  • Stainless steel components on all pump styles.
Valves - Doering valves are precision engineered and manufactured using stainless steel and a variety of other materials.
Faster Logo

FASTER COUPLINGS

Faster Couplings product portfolio entails several solutions, grouped into 3 main areas: single couplings, castings and cartridges, and MultiFaster. This covers several areas of application, including Agriculture, Construction Equipment, High Pressure and Industrial. These products can easily answer various market requests and meet specific requirements, set by the international standards and by different manufacturers.
Products
  • Couplings
  • MultiFaster
  • Casting Solutions
  • Accessories & Spares
Festo Logo

FESTO

Festo is a leading global manufacturer of pneumatic and electromechanical systems, components, and controls for process control and factory automation solutions. Celebrating 40 years of innovation in the United States and over 80 years globally, Festo continuously elevates the state of manufacturing with innovations and optimized motion control solutions.
Products
Compact Valves - Solenoid valve for fast applications with a high flow rate. As an individual valve, on a manifold rail or a sub-base. The compact range comprises valves and valve terminals for applications where installation space, weight, flow rate and mounting considerations are important. Thanks to the wide variety in the modular system, these compact valves and valve terminals cover almost 80% of all applications.
Features
  • Compact design
  • Connection M5
  • Plug connector 3, 4, 6 mm
  • Flow rate 180 to 200 l/min
  • Voltage 5, 12, 24 V DC
  • In-line valve
  • Solenoid actuated
  • Connection plates
Solenoid Valves - Globally certified in accordance with the current EX standards. Larger range of applications – thanks in part to the extended temperature range.
Features
  • Versatile, EX solenoid systems: from the intrinsically safe coil to the powerful FM EX coil – all solenoid coils are suitable for use on a flexible armature tube.
  • Excellent price/performance ratio
  • Sturdy and capable of high flow rates
Hedland Logo

HEDLAND

For over 33 years, Hedland has been a manufacturer of quality flow measurement solutions. Hedland’s product line has grown to over 15,000 inline, variable area flow meters to measure oil, phosphate esters, water, water-based fluids, pressurized air and other compressed gases. Meters designed for liquids are compatible with viscosities ranging from 40...500 SUS (4.2...108 cSt). Hedland products work well for both new and retrofit applications as they do not require flow straighteners, have no special piping requirements and may be installed in an orientation.
Products
Variable Area Flow Meters & Flow Switches - suited for the most demanding applications in fluid power, oil and gas, automotive, semiconductor, mining and discrete manufacturing.
Features
  • From ¼ - 3 inches (6 - 76 mm), quick visual indication on an easy-to-read linear scale
  • Hedland MR Transmitters deliver flow rate on a digital display and/or analog output
  • Models available for standard and high temperature applications
  • Available in aluminum, brass, stainless steel, polysulfone or Radel® bodies
  • Variety of end fitting options including, SAE threads, NPTF threads, BSPP threads (BSPT for 3"), PVC socket and swivel fittings, code 61/62 flanges and more
Internormen Logo

INTERNORMEN

The name "INTERNORMEN" represents more than 30 years of high class technical workmanship, entrepreneurial continuity and innovative strength in filtration for hydraulics and lubrication.

Production facilities can be found in Germany, the United States, India, Brazil and China. With a global distribution network in more than 80 countries, Internormens world-wide business activity is increasingly developed.

Physicists, chemists, engineers and technicians are on a quest for the perfect solution at the research centre located at Headquarters in Altlußheim, Germany.

INTERNORMEN Technology GmbH is present in many important key technologies, and its operations go much further than production and distribution of hydraulic and lubricating fluid filters.

Features
KOCSIS Logo

KOCSIS

Kocsis Technologies Inc. is an industry leading manufacturer of custom hydraulic Piston Accumulators, Hydraulic Starting Systems and Custom Cylinders. Their main focus is to provide their customers with the highest quality products at a fair price and competitive lead time. Their products are relied upon for use in numerous applications and industries throughout the world.
KTI Logo

KTI HYDRAULICS

KTI Hydraulics Inc. was founded in 1996 by Robert W Habermann and George King. The success of the company is owed to the vision these two pioneers. KTI Hydraulics is committed to offering the finest in hydraulic engineering, technology and applications globally. KTI's hydraulic power units are ideal for mobile and industrial needs and are trusted for use in heavy machinery like snowplows, dump trucks, backhoes, front loaders and rear loaders as well as industrial machinery including dock lifts, dock locks and compactors.
Products
Hydraulic Power Units - KTI Power Units come in a wide range of displacements and electric motor powers all offering low noise emissions. Ideal applications include lift trucks, automotive, small truck-mounted cranes, electro-hydraulic steering , and emergency backup systems. Models include unidirectional, reversible, with motor starting switch, with thermocouple, and/or with integral pressure relief valve.
Lenz Logo

LENZ

Established in 1946, Lenz has a long tradition of providing Distributors, OEM’s and customers with high-quality hydraulic solutions. Lenz filtration products are recognized for dirt holding performance and service life for customer applications.
Products
Hydraulic Filters - Lenz offers a complete range of inline, spin-on and tank immersed filtration products operating in low and medium pressure applications. Wide range of media element technology fits today’s mobile and industrial applications offering high efficiency synthetic glass fiber, high efficiency cost effective cellulose paper, wire mesh and water absorption.
Tank Accessories - Ball Valves
  • LBVA S.A.E High Pressure Ball Valve
  • LHBV N.P.T High Pressure Ball Valve
  • LPBC N.P.T Low Pressure Ball Valve
  • Locking Ball Valve
Magnom Logo

MAGNOM

Magnom’s patented technology is used to produce inexpensive filtration units, typically fitted in addition to conventional mechanical mesh filters. Magnom units have exceptionally long life and a design which enables them to capture a surprisingly large mass of ferrous material, filtering particle sizes down to 0.07µ (1µ, or micron = one millionth of a meter) , while never impeding fluid flow. This makes them suitable for cleaning fluids on the inlet suction side of pumps, so they remove particles before they enter critical system components. The long life of Magnom filters makes them ideal for use where scheduling downtime and gaining access for major maintenance is an issue, such as offshore wind turbines and deep sea trawlers.
Products
  • Suction Filtration (Pre Pump - Pump Mate)
  • Mini / Midi / Max Range (Low Pressure)
  • Circuit Protection Units (CP Units-High Pressure)
  • IPU & Max XL Products
  • Clear 5 / 10 / 20 / LF Core (Lube Oil-Low Pressure)
  • MPU & Multi Round Units
Marvel Filters Logo

MARVEL FILTERS

Industrial and Mobile Hydraulic Filters
Since 1943, customers have relied upon Marvel Engineering, Inc. to manufacture and distribute high quality replacement filters for a variety of industries. Marvel Engineering's experience includes almost 50 years as a leader in providing high quality filters for the industrial and mobile industries. We offer an assortment of hydraulic filters for hundreds of proven performance applications in the following areas.
Products
  • Air Filtration & Separation
  • Hydraulic Oils
  • Oil & Water Separation
  • Solvents
  • Water Glycol
  • Fire Resistant Fluids
  • OEM
  • Government Certified
Marzocchi Logo

MARZOCCHI POMPE

Founded in 1961, Marzocchi Pompe SPA is a company that is dedicated to the exclusive designing, manufacturing and selling of external gear pumps and motors for high performance. Marzocchi Pompe is specialized in micro hydraulics but at the same time has an extended range of products to cover all the standard needs of the market in terms of displacement, flanges, shafts and porting. The entire production is developed in Italy and only in Italy.
Products
Pumps
  • ELIKA series low noise, low ripple, high efficiency gear pumps
  • 0,25-0,5 series micropumps
  • 1P and K1P series aluminium pumps from 1.1 to 8 cc/rev
  • GHP series aluminium/cast iron gear pumps
  • ALP_GHP series multples modular pumps catalogue (aluminium and aluminium/cast iron gear pumps) from 1.4 to 200 cc/rev
  • HI-LO Series multiple pumps
  • T-SYSTEM series pumps and motors with support bearing for applications with axial or radial loads
  • EK1P series catalogue mini power pack pumps for submerged applications from 0.9 cc/rev to 5.8 cc/rev
MaxPro Logo

MAXPRO

Maxpro is the North American provider of Maximator. Providing you with high pressure liquid pumps, gas boosters, air amplifiers, valves, fittings, tubing and custom-made systems manufactured to meet your exact requirements. These high quality products are used in a wide variety of industries with many applications. Examples include Oil & Gas, Food Processing, Aerospace, Automotive, Plastics, Hydrostatic Pressure Testing, Manufacturing, Space, Military, Energy, Petrochemical, Diving, Fire & Safety and many others.
Products
High Pressure Valves, Fittings and Tubing - Traceability is ensured on all high pressure products through extensively documented data, including batch number, maximum pressure, material number and type designation.
  • Pipe Valves, Fittings and nipples - Exceeds industry standard of 15,000 psi. Pipe valves with metal to metal seats have a high level of safety and reliability under adverse operating conditions. These valves may be used both with gases and liquids.
  • Medium pressure components - MAXIMATOR needle valves are high quality with a high level of safety and reliability under adverse operating conditions.
  • High pressure components – ranging from 30 000 to 60 000 psi, MAXIMATOR high pressure valves with metal to metal seats have a high level of safety and reliability under adverse operating conditions. These needle valves may be used both with gases and liquids.
  • Ultra high pressure components - Fittings, tubings, coned and threaded nipples, and ultra high pressure needle valves for pressures to 100 000 psi and are made under strict manufacturing and quality control standards and inspections, with dimensional tolerances to match the requirements of the ultra high pressure coned and threaded connections.
  • Valve actuators - MAXIMATOR® air operated valve actuators are piston type design, and are mounted on a manual valve to provide remote control capability. There are two styles of air actuators available, and selection is based on the valve size, system pressure, and air pressure available.
  • Ball valves - Maximator High Pressure Trunnion Style Stainless Steel Ball Valves provide superior quality and are available in a variety of orifice and connection sizes in both 2 and 3-way body patterns. The robust one-piece trunnion style stem eliminates shear failures. The high pressure ball valves are also available with optional single or double acting pneumatic actuators.
  • Adapters, couplings and accessories - The two connections can be a variety of tube or pipe connection types, with different size combinations possible. All high pressure pipe connections rated to 15,200 psi are high pressure NPT fittings. All adapters are made of 316 cold worked stainless steel material; other materials are available upon request. Glands and collars are included with each female tube connection.
High Pressure Air Driven Liquid Pumps
  • Oil or Oil/Water Service - pumps are lightweight and rugged making them ideal for portable power packs and are available in eight pressure ratios. Pumps are single acting, single air drive head types and are designed for simple installation in both static and portable applications.
  • Water or Oil Services - pumps are available as single acting with either a single or double air drive head and double acting with single air drive head. L series pumps have stainless steel bodies and 17-4 plungers. All L pumps come with an unregulated pilot port, 1/8" FNPT, in the top cap. This feature provides more accurate pressure in the top cap. This feature provides more accurate pressure control and is an ideal location for control instrumentation.
  • Chemical Services - These pumps are available as single acting pumps with single air drive head and distance piece which provides a separation between the liquid and air drive sections. From 60 to 23 200 PSI.
  • Hydrostatic Test Equipment - Portable hydrostatic testers require only a shop air line to operate if the reservoir option is selected. Several liquid pumping systems are available for Rental. Pressures ranging from 1000 PSI to 60000 PSI.
Gas Boosters
  • Air Driven - an excellent alternative to high pressure stationary type compressors. These boosters offer a compact, lightweight design that requires no electrical power or lubrication, thereby providing a more flexible and efficient source for delivering high pressure gas.
  • Hydraulic Driven - a great alternative to our Air Driven Booster line when higher flow rates, 100% duty use, and customized control options are called for.
Air Amplifiers - ideal for turn-key installation at work stations or machine centers to boost plant air pressure for tools or operation of pneumatic clamps, cylinders and other equipment. Several Air Amplifier systems are available as rentals.
High Pressure Test Systems and Equipment
  • Liquid Pump Systems - ideal for generating elevated hydraulic or water pressures, using only shop air, at a variety of locations throughout a facility. There are both custom and standard systems. Some are completely portable and require only a shop air line to operate if the reservoir option is selected.
  • Gas Booster Systems - provide a compact, portable source for increasing gas pressures. These air driven booster systems are shipped assembled and fully tested, ready for turn-key installation. As with standard boosters, the gas booster systems require no electrical power, providing safe and economical operation.
  • Air Amplifier Systems - ideal for turn-key installation at work stations or machine centers to boost plant air pressure for tools or operation of pneumatic clamps, cylinders and other equipment. Several systems are available as Rentals.
  • High Pressure Data Logger - designed to simplify recording test data generated by MAXPRO Liquid Pump and Gas Booster packaged systems. The Pressure Logger is useful in any industry requiring an easy and accurate way to record pressure tests. The Pressure Logger includes a pressure transducer, two preformatted jump drives and easy to follow instructions for creating customized test reports.
Coning and Threading Machines - High pressure industries need to conveniently and quickly cone and thread high pressure thick walled stainless steel tubing. Maxpro Technologies has designed a safe, easy-to-use, semi-automated, dedicated machine to perform this very common tube preparation. The right tool for the job! The Coning and Threading machine is also available CE marked for European use.
Rental Equipment - Save money in your high pressure, manufacturing process. By renting, you are getting all the advantages of using a high quality product without the expense of purchase and maintenance. We rent a wide variety of power products, including:
  • Hydrostatic test units
  • Coning and Threading machines
  • Air amplifier systems
Moog Logo

MOOG

Servovalves and Servo-Proportional Valves are electrohydraulic, continuously acting valves that transform a changing analog or digital input signal into a stepless hydraulic output (flow or pressure). Moog's products are often the valve of choice for systems requiring a high degree of accuracy or precision. Moog has over 40 years of product design and manufacturing experience with servo and proportional valves for the industrial market.

High-performance valves are usually classified as either servo or servo-proportional, a distinction that gives an indication of expected performance.

The term servovalve describes valves that function as closed-loop control devices. These valves monitor and feed back the main stage spool position to the pilot stage either mechanically (Mechanical Feedback Valve) or electronically (Electrical Feedback Valve).

Servo-Proportional Valves are used as final control elements in open or closed loops. This means that their static and dynamic properties have a decisive influence on the overall characteristics of the electrohydraulic system.
CONTACT LYNCH WEBSITE
MPFiltri Logo

MP FILTRI

MP Filtri, an ISO 9001 and Vision 2000 certified company, is dedicated to global hydraulic filtration equipment solutions. Whether it’s a portable, in line, or sampling application, MP Fliltri provides a range of conetamination monitoring products.
Products
Visual Level Gauge - indicators of fluid for hydraulic tank
  • Visual level indicators, length up to 2000 mm
  • Round level indicators
Nason Logo

NASON

After more than sixty years of producing quality electrical, hydraulic, and pneumatic components for use in military and industrial applications, NASON is a leader in space-efficient electrical, hydraulic and pneumatic components. Parts made by Nason are used around the globe in the harshest of environments. The company offers extensive options in ratings, connection and mounting.
Products
Hydraulic & Pneumatic Pressure Switches - Nason’s complete line of pressure switches offers design engineers a choice of low to high pressure switch models ranging from 2 PSI to 7500 PSI. Models are available for both pneumatic and hydraulic applications. All of Nason’s pressure switches use a snap-action electrical device activated by a precise, long-life elastomer diaphragm or piston offering a precise and repeatable design.
Nass Controls Logo

NASS CONTROLS

Established in 1988, Nass Controls offers electrical connectors commonly used on hydraulic and pneumatic solenoid valves, transducers, and other industrial electrical components.
Products
Solenoid Valve Connectors - with molded cable in the most popular pin patters. Common applications include hydraulic and pneumatic solenoid valves, machines, cranes and other industrial electronic equipment. These connectors save wiring time because the cable is already assembled and molded into the connector and they are IP67 rated.
Ortman Logo

ORTMAN FLUID POWER

Ortman Fluid Power makes and sells the highest quality hydraulic and pneumatic cylinders. These cylinders are used in manufacturing equipment, mining equipment, draw bridges, dam gates, nuclear power plants, timber equipment and any application that requires a reliable hydraulic and pneumatic cylinder. With their state of the art design software, and CNC manufacturing capabilities, Ortman can provide custom products for your needs, this goes for bore sizes 1-1/2" through 30".
Products
  • Hydraulic Cylinders
  • Pneumatic Cylinders
  • SpaceSaver Cylinders
  • Specialties
  • Custom
Peters Indu-Produkt Logo

PETERS INDU-PRODUKT

Founded in 1974 Peters Indu Produkt is an internationally recognized and established manufacturer of pneumatic, hydraulic, automation and sensor products. Designed and predominantly produced in the companies’ headquarters in Wesel, Germany, Peters Products are used worldwide.
Products
Connectors - Peters "Industrial" business field/unit offers valve connectors that meet DIN 43 650 and EN 175301-803 standards.
  • Tyco Superseal
  • Deutch DT 6,8 & 12 pol Male & Female
Ross Logo

ROSS CONTROLS

Headquartered in Troy, Michigan, ROSS Controls is an international manufacturer of pneumatic valves, controls systems, and safety products for the fluid power industry. Since its establishment in 1921, ROSS has been one of the industry's leaders in pneumatic valve technology.
Products
Safety Valves
Energy isolation - lockout valves, safety exhaust valves for clutch/break and non-clutch/break applications, safety cylinder return valves, and load holding valves.
Monitored Valves
ROSS Controls' hydraulic safety valves are proven to serve the application needs of energy isolation, safety exhaust, safe cylinder return, and load handling. Sound workplace safety practices reduce the risk of injury to employees including machine operators and maintenance technicians.
Valves for Air Control
  • Flow Control Valves
  • Check Valves
  • Shuttle Valves
Sistematica Logo

SISTEMATICA

Headquartered in Italy and ISO9001:2008 certified, Sistematica designs, develops and sells industrial radio remote controls in a wide range of solutions for a variety of needs and applications including hydraulic power packs, industrial automation, hydraulic cranes on lorry, farm machinery and road maintenance vehicles.
Products
Trend Handheld Device - Each controller has a distinct code that prevents interaction with unidentified systems. Manufactured in highly resistant molded plastic with a rubber shell that makes its hold firmer with drop protection guaranteed from a height of 4 meters. Functions in unfavorable environments with a temperature range from -20°C to +55°C. The device is watertight with protection level IP67.
Staffa Logo

STAFFA

For more than 60 years the Staffa name has been synonymous with premium radial piston hydraulic motors. The Staffa product range has continued to develop into fixed, variable and high power versions that provide high-torque, low-speed control to a wide range of applications. Staffa motors are found in the most arduous marine and industrial applications such as deck machinery, offshore winches, plastic injection moulding machines and drill rigs. The hydraulically balanced construction and Kawasaki's no-compromise approach to quality result in a motor with foremost reliability.
Products
Motors
  • Staffa Range of High Torque low speed fixed displacement radial piston hydraulic motors.
  • Consists of 13 frame sizes ranging from the HMB010 to HMB700.
  • Capacity ranges from 50 to 11,600cc/rev.
  • Rugged, well proven design incorporates high efficiency, combined with good breakout torque and smooth running capability.
  • Various features and options are available including, on request, mountings to match competitors’ interfaces.
Star Hydraulics Logo

STAR HYDRAULICS

Star Hydraulics Ltd designs and manufactures high-quality Electro-Hydraulic Servo-Valves (EHSV) utilising sapphire technology™ and modernised EHSV components. Established in 1983 are based in the U.K, Star Hydraulics Ltd has become one of the world’s leading manufacturers of industrial servo valves.
Electro-hydraulic servo valves have been available for many decades but for lots of user’s early technology was associated with high running costs and downtime due to weaknesses in valve design. By focusing on common malfunctions, such as 'Ball Glitch', 'Inlet Orifice Erosion', 'Inlet Orifice Release' and 'Flexure Sleeve Fatigue', Star Hydraulics re-engineered and re-manufactured the Servo Valve, resulting in product life extension, and greater reliability.
Stucchi Logo

STUCCHI USA INC.

Stucchi is an "ISO 9001/Vision 2000" certified manufacturer of hydraulic quick disconnects based in Brignano, Italy. Stucchi's solutions based approach meets the demanding requirements for a variety of applications spanning multiple markets including Construction, Agriculture, Automation, Chemical, Off-Shore / Land based Oil & Gas, Pulp & Paper, Plastics, Public Utilities, and many others. Stucchi is a recognized global leader in the design and manufacturing of quick coupling products providing a variety of sizes and port configurations ranging from 1/8 inch to 2-1/2 inch sizes to accommodate a wide field of application requirements. Stucchi's pressure capabilities extend to 10,000 psi working pressure, port configurations include imperial & metric standard in stock, materials from Brass to 316 Stainless Steel, and an assortment of seal options.
Products
Flat Face Style Couplers - Specifically designed for applications needing no-leak performance. The mating faces are easily cleaned before connecting, making it the ideal solution for limiting contamination in hydraulic circuit. The design allows applications involving high pressure impulses in agriculture equipment, mobile construction equipment and general industrial plants. Non-Spill design avoids fluid loss in connection and disconnection.
Multi-Coupling Plates - Applications include front end loaders, harvesting equipment, construction machinery, refrigeration, snow removal equipment, and any other applications requiring connection under residual pressure of multiple couplings.
Misc. Items - Stucchi has a wide variety of specialized couplers including wingstyle interchange, hardened steel for higher burst pressure, adapter couplings providing compatibility between old and new equipment, and zinc plated check valves. All specialized couplings can be found in Stucchi's catalog.
Turck Logo

TURCK

TURCK is a leading manufacturer of products designed for factory and process automation industries. The company makes a range of sensor, fieldbus, interface and connectivity products, for applications in factory and process automation.
Products
Field Wireable Connectors - Full selection in a variety of shapes and sizes to solve those applications where a pre-molded cordset is not readily available.
Wika Logo

WIKA

A family-run business acting globally, WIKA is a global market expert in pressure, temperature and level measurement technology with over 60 years of experience. WIKA supports companies in machine building with instrumentation solutions and services for pressure, temperature, level and flow measurement and only supplies instruments which meet the guidelines and standards of the machine building industry.
Products
Mechanical Pressure Measuring Instruments - Indicating pressure gauges for gauge, absolute and differential pressure with Bourdon tube, diaphragm or capsule pressure elements have been tested millions of times over. These instruments cover scale ranges from 0...0.5 mbar to 0...7,000 bar and indication accuracies of up to 0.1%.
Yuken Logo

YUKEN

Founded in 1929, YUKEN is a global company headquartered in Japan with an extensive line of hydraulic products and certain types of machinery dependant on hydraulic power. The company produces high quality hydraulic component piston and vane pumps as well as a wide range of valves including servo, electro-hydraulic proportional and solenoid.
Products
Poppet Type Directional Valves - Solenoid Operated Directional Valves of No Leak Type.
Manually Operated Directional Valves - Manual shift of spool position and change of the direction of oil flow.
Mechanically Operated Directional Valves - Rotary Type Directional Valves and Cam Operated Type Directional Valves.
Solenoid Operated Directional Valves - DSG-005 series solenoid directional valves "mini series". 3/8 solenoid operated directional valves, DSG-03 Series.
Solenoid Controlled Pilot Operated Directional Valves - Composed of a solenoid operated pilot valve and a pilot operated slave valve. High pressure [31.5 MPa (4570 PSI)] along which high flow means compact system design. Low pressure drop ensures system energy savings.
Solenoid Operated Directional Control Logic Valves - Composed of directional control valves and solenoid operated directional valves combined together. Solenoid operated directional valves serve to switch pilot lines and the directional control valves are used to control the direction of the main circuits. Covers provided with various control valves are available to provide optimum control.
Zinga Logo

ZINGA

Zinga has provided filtration and reservoir accessory product solutions for the mobile hydraulic market since 1976. An ISO 9001 registered company, Zinga provides a full range of hydraulic oil filtration components to numerous mobile equipment markets providing protection to critical pieces of equipment in construction, agriculture, utility, refuse and mining.
Products
  • Spin on Filters
  • Spin on Filter Heads
  • Pressure Filters
  • Pressure Filter Elements
  • Tank-Top/Reservoir Filter
  • Tank-Top/Reservoir Filter Elements
Lynch Headquarters Mississauga on map.
Canada
1799 Argentia Road
Mississauga, Ontario, L5N 3A2
Lynch Headquarters New York on map.
U.S.A.
3790 Commerce Court Suite 500,
North Tonawanda, New York, 14120